Product
Environmental measurement, fluid measurement, particle measurement

Product

Number of views:
1000

Filter material filtration efficiency resistance test bench

Retail price
0.0
Market price
0.0
Number of views:
1000
Product serial number
Quantity
-
+
Stock:
0
Category
BACK
1
Detail
[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[产品参数, 参数]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]

The main purpose:

Filter material filtration efficiency/resistance test bench is used to test the filtration efficiency and resistance of daily protective masks and filter materials to particulate matter;

 

According to the standard:

GB 32610-2016 "Technical Specification for Daily Protective Masks"

GB 2626-2006 "Respiratory protective equipment self-priming filter anti-particulate respirator"

GB 19081-2009 "Technical Requirements for Medical Disposable Protective Clothing"

GB 19083-2010 "Technical Requirements for Medical Protective Masks"

YY 0469-2011 medical surgical mask

"European Standard EN1822-3: 2009 Leaflet Filter Material Test"

 

Device Description 

The test bench uses polydisperse experimental aerosols (NaCl, PAO-4 or DEHS) to quantify dust generation, and tests are carried out by the concentration and pressure changes of aerosol particles upstream and downstream of the tested filter material. It is suitable for testing a variety of filter materials (melt blown, glass fiber, PP, film and other filter materials), medical masks and some labor protection products. The self-developed measurement and control software is stable and reliable, easy to operate, and the operating parameters are clear at a glance. It is convenient to switch the test of different aerosols (NaCl, PAO-4 or DEHS).

 

basic configuration

1), aerosol generator

2), laser particle counter

3), differential pressure transmitter

4), flow transmitter

5), aerosol concentration regulator

6), electrostatic neutralization device

7), heating device

8), parameter input/display touch screen

9), micro printer

10), standard fixture

 

Technical Parameters

1) Applicable filter material: glass fiber filter material, PP filter material, membrane filter material

2), the detection particle size range: 0.3, 0.5, 1.0, 3.0, 5.0, 10.0 μm (six ranges)

3) Flow range: 20~100 l/min

4) Range of detection resistance: 0~1000 Pa

5) Dust source: NaCl, PAO-4 or DEHS

6), test area: 100 cm2

7) Power supply: 220V/50 Hz 1500W

8), Dimensions: 700 mm (width) × 700 mm (depth) × 1350 mm (height)

Scan the QR code to read on your phone
We could not find any corresponding parameters, please add them to the properties table

Related products

 F9131 Air Conditioner Filter Gas Filtration Test Bench
F9131 Air Conditioner Filter Gas Filtration Test Bench
Test item
1. Airflow resistance test
2. Adsorption efficiency/penetration rate
3. Determine desorption
 Wind tunnel
Wind tunnel
Small footprint
Less investment
Simple control
Can do smoke flow experiment
Stable low wind speed measurement
 Small correction wind tunnel
Small correction wind tunnel
Small footprint
Less investment
Simple control
Stable low wind speed measurement
 Reflux low-speed wind tunnel-I
Reflux low-speed wind tunnel-I
Using a DC motor to drive the axial flow fan has less impact on the test results of the product. No electromagnetic interference to the DUT.
The fan and fan are designed with aero engine technology and apply high-strength aerospace technology.
It is made of gold and aluminum, and is equipped with front and rear deflectors, so that the manufactured axial flow fan has high efficiency, low temperature rise, low noise and high wind field quality.
 Reflux low-speed wind tunnel-Ⅱ
Reflux low-speed wind tunnel-Ⅱ
Using a DC motor to drive the axial flow fan has less impact on the test results of the product. No electromagnetic interference to the DUT.
The fan and fan are designed with aero engine technology and apply high-strength aerospace technology.
It is made of gold and aluminum, and is equipped with front and rear deflectors, so that the manufactured axial flow fan has high efficiency, low temperature rise, low noise and high wind field quality.
 Low speed wind tunnel-Ⅱ
Low speed wind tunnel-Ⅱ

友情链接

Contact us

img

No.58 Zhengliang 4th Road, Daoyi Development Zone, Shenbei New District, Shenyang City

img

Official website of mobile phone

img

WeChat official account

Copyright © 2021 xinke.net.cn All rights reserved.      辽ICP备05024146号-1    Powered by:300.cn  Shenyang