Product
Environmental measurement, fluid measurement, particle measurement

Product

Number of views:
1000

F9531 standard particle generator

Purpose
It can generate air containing monodisperse particles with a certain particle size and a certain concentration, which meets the need for dust particle counter calibration by comparing the reference particle counter and the particle counter to be tested.
Main function
●It can be used for the verification of the maximum saturation concentration of the particle counter
●It can be used to verify the counting efficiency of particle counters
●It can be used for the verification of reliable counting of particle counters
●Suitable for the sampling flow requirements of different particle counters from 1L/min to 100L/min, and up to two particle counters with an inherent flow rate of 100L/min can be connected at the same time
Retail price
0.0
Market price
0.0
Number of views:
1000
Product serial number
Quantity
-
+
Stock:
0
Category
BACK
1
Detail
[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[产品参数, 参数]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]

Meet and comply with the following regulations

·GB/T6167-2007 "Dust Particle Counter Performance Test Method
·ISO/FDIS21501-4:2007(E) "Light Scattering Dust Particle Counter Calibration Method for Clean Room"
·JJF1190-2008 "Dust Particle Counter Calibration Specification"
·2011 Edition GMP, JG/T292-2010 "Clean Workbench"

 

principle

This device is composed of aerosol generator, mixing system, flow reference and concentration calibration system. It uses the aerosol generation system to provide a quantitative supply of test particles, and uses uniform dilution, diffusion, stabilization, etc. to transport aerosols with a set concentration, and adopts aerosol photometer mass concentration standard device (reference photometer) or filter film to weigh Law as a traceability method.

 

Technical Parameters

project parameter
Calibration instrument 2.83L/min, 28.3L/min, 50L/min, 100L/min particle counter
Occurring particle size range (0.1~10)μm
Number of channels 5
Relative standard deviation of particle size distribution ≤5%
Particle concentration range (1000~100000)pcs/28.3L
Flow stability ±5%/8h
Repeatability of particle concentration measurement ≤5%
Air cleanliness Particles above 0.3μm≤3pcs/L
Reference Size 900mm (length) × 360mm (width) × 900mm (height), mixing distributor 300mm (diameter) × 1200mm (height)

 

Test items

·It can be used for the verification
of the maximum saturation concentration of the particle counter. It can be used for the verification of the counting efficiency of the particle counter. It can be used for the verification
of the reliable counting of the particle counter
. It is suitable for the sampling flow requirements of different particle counters from 1L/min to 100L/min, and can be connected at most at the same time. 2 particle counters with an inherent flow rate of 100L ./min

 

Optional

Scan the QR code to read on your phone
We could not find any corresponding parameters, please add them to the properties table

Related products

 F9131 Air Conditioner Filter Gas Filtration Test Bench
F9131 Air Conditioner Filter Gas Filtration Test Bench
Test item
1. Airflow resistance test
2. Adsorption efficiency/penetration rate
3. Determine desorption
 Wind tunnel
Wind tunnel
Small footprint
Less investment
Simple control
Can do smoke flow experiment
Stable low wind speed measurement
 Small correction wind tunnel
Small correction wind tunnel
Small footprint
Less investment
Simple control
Stable low wind speed measurement
 Reflux low-speed wind tunnel-I
Reflux low-speed wind tunnel-I
Using a DC motor to drive the axial flow fan has less impact on the test results of the product. No electromagnetic interference to the DUT.
The fan and fan are designed with aero engine technology and apply high-strength aerospace technology.
It is made of gold and aluminum, and is equipped with front and rear deflectors, so that the manufactured axial flow fan has high efficiency, low temperature rise, low noise and high wind field quality.
 Reflux low-speed wind tunnel-Ⅱ
Reflux low-speed wind tunnel-Ⅱ
Using a DC motor to drive the axial flow fan has less impact on the test results of the product. No electromagnetic interference to the DUT.
The fan and fan are designed with aero engine technology and apply high-strength aerospace technology.
It is made of gold and aluminum, and is equipped with front and rear deflectors, so that the manufactured axial flow fan has high efficiency, low temperature rise, low noise and high wind field quality.
 Low speed wind tunnel-Ⅱ
Low speed wind tunnel-Ⅱ

友情链接

Contact us

img

No.58 Zhengliang 4th Road, Daoyi Development Zone, Shenbei New District, Shenyang City

img

Official website of mobile phone

img

WeChat official account

Copyright © 2021 xinke.net.cn All rights reserved.      辽ICP备05024146号-1    Powered by:300.cn  Shenyang